AQUA COOLER RP SERIES
- No drain required
- Contemporary design to suit any workplace
- Stainless steel water reservoirs
- RP1 Cold water only
- RP3 Hot & Cold
- Supplies 5 Litres of chilled water
| Model | Aqua Cooler RP Series |
|---|---|
| Cold Water Reservoir | All products have a highly polished, stainless steel tank, each holds 1.8 Litres of chilled water during normal usage. Each cooler has a chilling capacity of 5 litres per hour during peak periods. |
| Hot Water Reservoir | The RP3 has a stainless steel hot water tank, which is fitted with a "wrap around" heating element and two thermostats for reliability and accuracy of water temperature. This tank will deliver approximaley 65 cups (150ml) per hour at plus 85°C. Each tank is fitted with a drain for easy sanitisation. |
| Refrigeration | All models use 40 gms of refrigerant H134A which is non-toxic, non-flammable and environmentally friendly. Refrigerant flow is controlled by a capillary tube which has no moving parts. |
| Temperature control | The thermostat is factory pre-set |
| Compressors | 1/16 hp capacity, 49 watts. The compressor is hermetically sealed for silent running. |
| Condenser | The static condenser is fabricated from steel tube and wire |
| Electrical | 240 volts, 50Hz. A 2 metre house cable and 3 pin plug is supplied |
| Performance* Water Inlet | 26.7°C |
| Performance* Water Outlet | 10°C |
| Performance* Ambient Air | 32.2°C |
| Weight (Packed) | RP1/RP2- 15kg RP3- 16kg |
| Width (mm) | 370 |
| Depth (mm) | 370 |
| Cubic (mm) | 950 |
Twelve months comprehensive coverage. Five years for compressor replacement. All models are fitted with a dust seal and air filter to maintain water quality. *Performance to ARI 1010-94 Standard